{"title":"Newmar Power","description":"","products":[{"product_id":"newmar-115-12-20a-power-supply-115-12-20a","title":"Newmar 115-12-20A Power Supply [115-12-20A]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e115-12-20A Power Supply\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis super-rugged DC power supply is ideal for powering 12-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions)\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003cli\u003eThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation\u003c\/li\u003e\n\u003cli\u003eProtection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input\/output fusing\u003c\/li\u003e\n\u003cli\u003eThermally activated cooling fan on “CD” units\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNominal Input\/VAC: 115\/230    \u003c\/li\u003e\n\u003cli\u003eMaximum Input Current @115: 5.5\u003c\/li\u003e\n\u003cli\u003eMaximum Input Current @230: 2.5\u003c\/li\u003e\n\u003cli\u003eOutput Amperage (Intermittent): 20\u003c\/li\u003e\n\u003cli\u003eOutput Amperage (Continuous): 8\u003c\/li\u003e\n\u003cli\u003eWeight: 20 lbs. \/ 9.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCase Size:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eH x W x D (inch): 5.7” x 4.8” x 16.3”\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInput Range\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e105-125\/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VAC\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStandard Units \u003c\/strong\u003e- 0-50 degrees C, Derate linearly from 100% @ 40 degrees C to 50% @ 50 degrees C thermal shutdown @ 85 degrees C case temperature\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours\/day 100% Duty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModify for use as a battery charger\u003c\/li\u003e\n\u003cli\u003eThe output voltage is adjusted (see Output Voltage for range)\u003c\/li\u003e\n\u003cli\u003eTransfer relay for back-up battery in event of power failure (ERC option)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e13.6 VDC (internally adjustable 12.6-14.5 VDC)\u003c\/li\u003e\n\u003cli\u003eRipple: 40mV P-P (@ 110-125 \/ 220-250 VAC input)\u003c\/li\u003e\n\u003cli\u003e1% Line and Load (@ 110-125 \/ 220-250 VAC input)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal-coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571987828966,"sku":"ANX-102286","price":1603.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102286XL.jpg?v=1756899534"},{"product_id":"newmar-115-12-35cd-power-supply-115-12-35cd","title":"Newmar 115-12-35CD Power Supply [115-12-35CD]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e115-12-35CD Power Supply\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis super-rugged DC power supply is ideal for powering 12-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions)\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003cli\u003eThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation\u003c\/li\u003e\n\u003cli\u003eProtection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input\/output fusing\u003c\/li\u003e\n\u003cli\u003eThermally activated cooling fan on “CD” units\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNominal Input\/VAC: 115\/230    \u003c\/li\u003e\n\u003cli\u003eMaximum Input Current @115: 7.5\u003c\/li\u003e\n\u003cli\u003eMaximum Input Current @230: 3.5\u003c\/li\u003e\n\u003cli\u003eOutput Amperage (Intermittent): 35\u003c\/li\u003e\n\u003cli\u003eOutput Amperage (Continuous): 35\u003c\/li\u003e\n\u003cli\u003eWeight: 32 lbs. \/ 14.6 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCase Size:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eH x W x D (inch): 6.5” x 9.5” x 14.0”\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInput Range\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e105-125\/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VAC\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eC.D. Units \u003c\/strong\u003e- 0-65 degrees C, Derate linearly from 100% @ 50 degrees C to 50% @ 65 degrees C thermal Shutdown @ 85 degrees C case temperature\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours\/day 100% Duty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModify for use as a battery charger\u003c\/li\u003e\n\u003cli\u003eThe output voltage is adjusted (see Output Voltage for range)\u003c\/li\u003e\n\u003cli\u003eTransfer relay for back-up battery in event of power failure (ERC option)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e13.6 VDC (internally adjustable 12.6-14.5 VDC)\u003c\/li\u003e\n\u003cli\u003eRipple: 40mV P-P (@ 110-125 \/ 220-250 VAC input)\u003c\/li\u003e\n\u003cli\u003e1% Line and Load (@ 110-125 \/ 220-250 VAC input)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal-coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571987861734,"sku":"ANX-102287","price":2342.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102287XL.jpg?v=1756899534"},{"product_id":"newmar-115-12-8-power-supply-115-12-8","title":"Newmar 115-12-8 Power Supply [115-12-8]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e115-12-8 Power Supply\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis super-rugged DC power supply is ideal for powering 12-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions)\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003cli\u003eThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation\u003c\/li\u003e\n\u003cli\u003eProtection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input\/output fusing\u003c\/li\u003e\n\u003cli\u003eThermally activated cooling fan on “CD” units\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNominal Input\/VAC: 115\/230    \u003c\/li\u003e\n\u003cli\u003eMaximum Input Current @115: 2.5\u003c\/li\u003e\n\u003cli\u003eMaximum Input Current @230: 1.5\u003c\/li\u003e\n\u003cli\u003eOutput Amperage (Intermittent): 8\u003c\/li\u003e\n\u003cli\u003eOutput Amperage (Continuous): 5\u003c\/li\u003e\n\u003cli\u003eWeight: 32 lbs. \/ 14.6 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCase Size:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eH x W x D (inch): 6.0” x 4.6” x 8.5”\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInput Range\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e105-125\/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VAC\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStandard Units\u003c\/strong\u003e - 0-50 degrees C, Derate linearly from 100% @ 40 degrees C to 50% @ 50 degrees C thermal shutdown @ 85 degrees C case temperature\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours\/day 100% Duty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModify for use as a battery charger\u003c\/li\u003e\n\u003cli\u003eThe output voltage is adjusted (see Output Voltage for range)\u003c\/li\u003e\n\u003cli\u003eTransfer relay for back-up battery in event of power failure (ERC option)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e13.6 VDC (internally adjustable 12.6-14.5 VDC)\u003c\/li\u003e\n\u003cli\u003eRipple: 40mV P-P (@ 110-125 \/ 220-250 VAC input)\u003c\/li\u003e\n\u003cli\u003e1% Line and Load (@ 110-125 \/ 220-250 VAC input)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal-coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571987894502,"sku":"ANX-102288","price":735.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102288XL.jpg?v=1756899533"},{"product_id":"newmar-115-24-10-power-supply-115-24-10","title":"Newmar 115-24-10 Power Supply [115-24-10]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e115-24-10 Power Supply\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis super-rugged DC power supply is ideal for powering 24-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions)\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003cli\u003eThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation\u003c\/li\u003e\n\u003cli\u003eProtection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input\/output fusing\u003c\/li\u003e\n\u003cli\u003eThermally activated cooling fan on “CD” units\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNominal Input\/VAC: 115\/230    \u003c\/li\u003e\n\u003cli\u003eMaximum Input Current @115: 5.5\u003c\/li\u003e\n\u003cli\u003eMaximum Input Current @230: 2.5\u003c\/li\u003e\n\u003cli\u003eOutput Amperage (Intermittent): 10\u003c\/li\u003e\n\u003cli\u003eOutput Amperage (Continuous): 4\u003c\/li\u003e\n\u003cli\u003eWeight: 20 lbs. \/ 9.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCase Size:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eH x W x D (inch): 5.7” x 4.8” x 16.3”\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInput Range\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e105-125\/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VAC\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStandard Units\u003c\/strong\u003e - 0-50 degrees C, Derate linearly from 100% @ 40 degrees C to 50% @ 50 degrees C thermal shutdown @ 85 degrees C case temperature\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours\/day 100% Duty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModify for use as a battery charger\u003c\/li\u003e\n\u003cli\u003eThe output voltage is adjusted (see Output Voltage for range)\u003c\/li\u003e\n\u003cli\u003eTransfer relay for back-up battery in event of power failure (ERC option)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24.5 VDC (Internally adjustable 21-27.5 VDC)\u003c\/li\u003e\n\u003cli\u003eRipple: 70mV P-P (@ 110-125 \/ 220-250 VAC input)\u003c\/li\u003e\n\u003cli\u003e1% Line and Load (@ 110-125 \/ 220-250 VAC input)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal-coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571987927270,"sku":"ANX-102289","price":1593.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102289XL.jpg?v=1756899533"},{"product_id":"newmar-115-24-18cd-power-supply-115-24-18cd","title":"Newmar 115-24-18CD Power Supply [115-24-18CD]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e115-24-18CD Power Supply\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis super-rugged DC power supply is ideal for powering 24-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions)\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003cli\u003eThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation\u003c\/li\u003e\n\u003cli\u003eProtection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input\/output fusing\u003c\/li\u003e\n\u003cli\u003eThermally activated cooling fan on “CD” units\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNominal Input\/VAC: 115\/230    \u003c\/li\u003e\n\u003cli\u003eMaximum Input Current @115: 5.5\u003c\/li\u003e\n\u003cli\u003eMaximum Input Current @230: 2.5\u003c\/li\u003e\n\u003cli\u003eOutput Amperage (Intermittent): 10\u003c\/li\u003e\n\u003cli\u003eOutput Amperage (Continuous): 4\u003c\/li\u003e\n\u003cli\u003eWeight: 20 lbs. \/ 9.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCase Size:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eH x W x D (inch): 5.7” x 4.8” x 16.3”\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInput Range\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e105-125\/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VAC\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eC.D. Units\u003c\/strong\u003e - 0-65 degrees C, Derate linearly from 100% @ 50 degrees C to 50% @ 65 degrees C thermal Shutdown @ 85 degrees C case temperature\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours\/day 100% Duty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModify for use as a battery charger\u003c\/li\u003e\n\u003cli\u003eThe output voltage is adjusted (see Output Voltage for range)\u003c\/li\u003e\n\u003cli\u003eTransfer relay for back-up battery in event of power failure (ERC option)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24.5 VDC (Internally adjustable 21-27.5 VDC)\u003c\/li\u003e\n\u003cli\u003eRipple: 70mV P-P (@ 110-125 \/ 220-250 VAC input)\u003c\/li\u003e\n\u003cli\u003e1% Line and Load (@ 110-125 \/ 220-250 VAC input)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal-coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571987960038,"sku":"ANX-102290","price":2492.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102290XL.jpg?v=1756899532"},{"product_id":"newmar-115-24-35cd-power-supply-115-24-35cd","title":"Newmar 115-24-35CD Power Supply [115-24-35CD]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e115-24-35CD Power Supply\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis super-rugged DC power supply is ideal for powering 24-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions)\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003cli\u003eThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation\u003c\/li\u003e\n\u003cli\u003eProtection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input\/output fusing\u003c\/li\u003e\n\u003cli\u003eThermally activated cooling fan on “CD” units\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNominal Input\/VAC: 115\/230    \u003c\/li\u003e\n\u003cli\u003eMaximum Input Current @115: 5.5\u003c\/li\u003e\n\u003cli\u003eMaximum Input Current @230: 2.5\u003c\/li\u003e\n\u003cli\u003eOutput Amperage (Intermittent): 10\u003c\/li\u003e\n\u003cli\u003eOutput Amperage (Continuous): 4\u003c\/li\u003e\n\u003cli\u003eWeight: 20 lbs. \/ 9.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCase Size:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eH x W x D (inch): 5.7” x 4.8” x 16.3”\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInput Range\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e105-125\/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VAC\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eC.D. Units \u003c\/strong\u003e- 0-65 degrees C, Derate linearly from 100% @ 50 degrees C to 50% @ 65 degrees C thermal Shutdown @ 85 degrees C case temperature\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours\/day 100% Duty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModify for use as a battery charger\u003c\/li\u003e\n\u003cli\u003eThe output voltage is adjusted (see Output Voltage for range)\u003c\/li\u003e\n\u003cli\u003eTransfer relay for back-up battery in event of power failure (ERC option)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24.5 VDC (Internally adjustable 21-27.5 VDC)\u003c\/li\u003e\n\u003cli\u003eRipple: 70mV P-P (@ 110-125 \/ 220-250 VAC input)\u003c\/li\u003e\n\u003cli\u003e1% Line and Load (@ 110-125 \/ 220-250 VAC input)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal-coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571987992806,"sku":"ANX-102291","price":3675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102291XL.jpg?v=1756899532"},{"product_id":"newmar-32-12-15-dc-converter-32-12-15","title":"Newmar 32-12-15 DC Converter [32-12-15]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e32-12-15 DC Converter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConvert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating\u003c\/li\u003e\n\u003cli\u003eThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNumerous Converter and Load Protection Circuits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\u003cli\u003eAutomatic thermal shutdown\u003c\/li\u003e\n\u003cli\u003eShort circuit proof\u003c\/li\u003e\n\u003cli\u003eReverse polarity\u003c\/li\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eCarries CE mark\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 20-50\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 15\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 15\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 4.5 x 5.9 x 11.0 inches (11.4 x 15.0 x 27.9 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 5 lb. (2.3 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)\u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 kHz\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical.\u003c\/li\u003e\n\u003cli\u003eIsolation: Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle Ratings*:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating.\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours, 100% duty *24-12-3: 2-minute max. on time\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOperating Temp Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C.\u003c\/li\u003e\n\u003cli\u003eThermal shutdown @ 70 degrees C Case Temperature\u003c\/li\u003e\n\u003cli\u003eModel 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)\u003c\/li\u003e\n\u003cli\u003eExtreme vibration mounting kit. (Information below)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOption: Extreme Vibration Mounting Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for units that weigh 16–7 lbs.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571988353254,"sku":"ANX-102303","price":730.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102303XL.jpg?v=1756899527"},{"product_id":"newmar-32-12-25-dc-converter-32-12-25","title":"Newmar 32-12-25 DC Converter [32-12-25]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e32-12-25 DC Converter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConvert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation: Output voltage maintained within 1% under all line and load conditions within rating\u003c\/li\u003e\n\u003cli\u003eHeat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNumerous Converter and Load Protection Circuits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\u003cli\u003eAutomatic thermal shutdown\u003c\/li\u003e\n\u003cli\u003eShort circuit proof\u003c\/li\u003e\n\u003cli\u003eReverse polarity\u003c\/li\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eCarries CE mark\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 20-50\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 25\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 20\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 6.0 x 4.7 x 14.0 inches (15.2 x 11.9 x 35.6 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 7.5 lb. (3.4 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)\u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 Khz\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical.\u003c\/li\u003e\n\u003cli\u003eIsolation: Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle Ratings*:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating.\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours, 100% duty *24-12-3: 2 minute max. on time\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOperating Temp Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C.\u003c\/li\u003e\n\u003cli\u003eThermal shutdown @ 70 degrees C Case Temperature\u003c\/li\u003e\n\u003cli\u003eModel 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)\u003c\/li\u003e\n\u003cli\u003eExtreme vibration mounting kit. (Information below) \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOption: Extreme Vibration Mounting Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for units that weigh 16–7 lbs.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571988386022,"sku":"ANX-102304","price":1020.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102304XL.jpg?v=1756899527"},{"product_id":"newmar-32-12-35-dc-converter-32-12-35","title":"Newmar 32-12-35 DC Converter [32-12-35]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e32-12-35 DC Converter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConvert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating\u003c\/li\u003e\n\u003cli\u003eThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNumerous Converter \u0026amp; Load Protection Circuits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\u003cli\u003eAutomatic thermal shutdown\u003c\/li\u003e\n\u003cli\u003eShort circuit proof\u003c\/li\u003e\n\u003cli\u003eReverse polarity\u003c\/li\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eCarries CE mark\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 20-50\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 35\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 30\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 6.0 x 4.7 x 16.0 inches (15.2 x 11.9 x 40.6 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 12 lb. (5.5 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)\u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 kHz\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical.\u003c\/li\u003e\n\u003cli\u003eIsolation: Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle Ratings*:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating.\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours, 100% duty *24-12-3: 2-minute max. on time\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOperating Temp Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C.\u003c\/li\u003e\n\u003cli\u003eThermal shutdown @ 70 degrees C Case Temperature\u003c\/li\u003e\n\u003cli\u003eModel 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)\u003c\/li\u003e\n\u003cli\u003eExtreme vibration mounting kit. (Information below)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOption: Extreme Vibration Mounting Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit. It fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for 16–7 lbs.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571988418790,"sku":"ANX-102305","price":1397.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102305XL.jpg?v=1756899526"},{"product_id":"newmar-32-12-50-dc-converter-32-12-50","title":"Newmar 32-12-50 DC Converter [32-12-50]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e32-12-50 DC Converter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConvert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating\u003c\/li\u003e\n\u003cli\u003eThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNumerous Converter and Load Protection Circuits:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCurrent limiting\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAutomatic thermal shutdown\u003c\/li\u003e\n\u003cli\u003eShort circuit proof\u003c\/li\u003e\n\u003cli\u003eReverse polarity\u003c\/li\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eCarries CE mark\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 20-50\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 50\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 40\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 6.2 x 6.8 x 18.1 inches (15.7 x 17.3 x 46.0 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 16 lb. (7.3 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)\u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 kHz\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical.\u003c\/li\u003e\n\u003cli\u003eIsolation: Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle Ratings*:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating.\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours, 100% duty *24-12-3: 2-minute max. on time\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOperating Temp Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C.\u003c\/li\u003e\n\u003cli\u003eThermal shutdown @ 70 degrees C Case Temperature\u003c\/li\u003e\n\u003cli\u003eModel 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)\u003c\/li\u003e\n\u003cli\u003eExtreme vibration mounting kit. (Information below)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOption: Extreme Vibration Mounting Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Extreme Vibration Mounting Kit is available to protect Newmar power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit. It fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for 16–7 lbs.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571988451558,"sku":"ANX-102306","price":1538.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102306XL.jpg?v=1756899526"},{"product_id":"newmar-np-12-nav-pac-12v-np-12","title":"Newmar NP-12 Nav-Pac - 12V [NP-12]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNP-12 Nav-Pac - 12V\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMarine communication and navigation electronics such as programmable data transceivers, GPS, and other microprocessor-controlled devices require clean and steady DC input power. Their sensitive circuitry is highly vulnerable to voltage drops from engine starts, noise and line spikes from alternators and motors, and noise from various other electronic devices. NAV-PAC prevents these conditions from affecting electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents voltage “drop-out” during engine start and\/or other high intermittent loads such as Thrusters\u003c\/li\u003e\n\u003cli\u003eAbsorbs line “spikes”\u003c\/li\u003e\n\u003cli\u003eFilters out electrical interference\u003c\/li\u003e\n\u003cli\u003eProvides supplemental voltage and battery backup for up to 15 min.\u003c\/li\u003e\n\u003cli\u003eOptional remote panel (773-5037-0)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutput: 12 Volt @ 20 amps max.\u003c\/li\u003e\n\u003cli\u003eBattery: Sealed Rechargeable 5.0 Amp-Hour, 5-7 years of typical life, can be replaced. A low-voltage disconnect circuit protects the battery from total discharge. Certified by DOT and IATA for shipment by air.\u003c\/li\u003e\n\u003cli\u003eNoise Filtering: Audio through 200 MHZ\u003c\/li\u003e\n\u003cli\u003eVoltage Spike Protection: Transient energy capability; 100 Joules, 4,000 amps Max (8 x 20 microseconds)\u003c\/li\u003e\n\u003cli\u003eBack-Up Power: 8A for 15 minutes, 12A for 8 minutes, 18A for 2 minutes, and 20A for 1 minutes\u003c\/li\u003e\n\u003cli\u003eSize: 5.25 x 6.2 x 7.4 inches (13.3 X 15.7 X 18.8 cm)\u003c\/li\u003e\n\u003cli\u003eWeight: 5.9 lbs. (2.7 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571988746470,"sku":"ANX-102315","price":888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102315XL.jpg?v=1756899522"},{"product_id":"newmar-np-24-nav-pac-24v-np-24","title":"Newmar NP-24 Nav-Pac - 24V [NP-24]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNP-24 Nav-Pac - 24V\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMarine communication and navigation electronics such as programmable data transceivers, GPS, and other microprocessor-controlled devices require clean and steady DC input power. Their sensitive circuitry is highly vulnerable to voltage drops from engine starts, noise and line spikes from alternators and motors, and noise from various other electronic devices. NAV-PAC prevents these conditions from affecting electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents voltage “drop-out” during engine start and\/or other high intermittent loads such as Thrusters\u003c\/li\u003e\n\u003cli\u003eAbsorbs line “spikes”\u003c\/li\u003e\n\u003cli\u003eFilters out electrical interference\u003c\/li\u003e\n\u003cli\u003eProvides supplemental voltage and battery backup for up to 15 min.\u003c\/li\u003e\n\u003cli\u003eOptional remote panel (773-5037-0)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutput: 24 Volt @ 15 amps max.\u003c\/li\u003e\n\u003cli\u003eBattery: Sealed Rechargeable 5.0 Amp-Hour, 5-7 years of typical life, can be replaced. A low-voltage disconnect circuit protects the battery from total discharge. Certified by DOT and IATA for shipment by air.\u003c\/li\u003e\n\u003cli\u003eNoise Filtering: Audio through 200 MHZ\u003c\/li\u003e\n\u003cli\u003eVoltage Spike Protection: Transient energy capability; 100 Joules, 4,000 amps Max (8 x 20 microseconds)\u003c\/li\u003e\n\u003cli\u003eBack-Up Power: 8A for 15 minutes, 12A for 8 minutes, and 18A for 2 minutes\u003c\/li\u003e\n\u003cli\u003eSize: 6.0 x 6.75 x 7.5 inches (13.3 X 17.14 X 19 cm)\u003c\/li\u003e\n\u003cli\u003eWeight: 8 lbs. (3.6 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571988779238,"sku":"ANX-102316","price":960.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102316XL.jpg?v=1756899522"},{"product_id":"newmar-power-pac-14ah-power-supply-power-pac14ah","title":"Newmar Power-Pac 14AH Power Supply [POWER-PAC14AH]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower-Pac 14AH Power Supply  \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 12V DC power supply features built-in backup batteries, which are charged during normal operation and then continue to power radios and critical navigation equipment when AC power is lost. The Power-Pac is ideal for commercial vessels, work boats, and yachts.\u003c\/p\u003e\u003cp\u003eThe Power-Pac’s highly regulated, low-rising 10-amp output powers radios and other sensitive communications equipment without causing RF or audio interference. At the same time, it floats and charges one or two (depending on the model) built-in 7-amp\/hour backup batteries. These are kept at peak charge during the normal functioning of the unit when AC is being supplied. In the event of a loss of AC power, the internal batteries automatically take over to power communication equipment, providing a true uninterruptible DC source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHighly regulated, low ripple, noise-free 12-volt output\u003c\/li\u003e\n\u003cli\u003eBuilt-in, “on-line” stand-by battery provides immediate backup power in case of AC power loss\u003c\/li\u003e\n\u003cli\u003eInternal mounting space and terminals for conversion of the 7 A\/H model into the 14 A\/H model\u003c\/li\u003e\n\u003cli\u003eOutput “Normal” indicator L.E.D.\u003c\/li\u003e\n\u003cli\u003e“Back-up power only” warning light\u003c\/li\u003e\n\u003cli\u003eAudible and visual low battery (10.7 VDC) voltage indicators\u003c\/li\u003e\n\u003cli\u003eLow battery warning buzzer mute switch\u003c\/li\u003e\n\u003cli\u003eAutomatic low battery (10.3 VDC) voltage disconnect\u003c\/li\u003e\n\u003cli\u003eLow voltage disconnect override button\u003c\/li\u003e\n\u003cli\u003eOver-voltage protection\u003c\/li\u003e\n\u003cli\u003eCurrent limit protection\u003c\/li\u003e\n\u003cli\u003eInput\/output fused\u003c\/li\u003e\n\u003cli\u003eSeparate output terminals are provided for charging external batteries\u003c\/li\u003e\n\u003cli\u003e115\/230 50-60 Hz input, selected by a slide switch on the rear panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery Capacity: 14 amp\/hour  \u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 5.3 x 9.0 x 10.5 inches (13.3 x 22.9 x 26.7 centimeters)  \u003c\/li\u003e\n\u003cli\u003eWeight: 24 lbs. (10.9 kg)\u003c\/li\u003e\n\u003cli\u003eInput: 115\/230 VAC, 50-60 Hz.\u003c\/li\u003e\n\u003cli\u003eOutput: 13.6 VDC @ 5A cont., 10A Int.\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% line and load\u003c\/li\u003e\n\u003cli\u003eRipple: 1% P-P\u003c\/li\u003e\n\u003cli\u003eOperating Temp: 0-40 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWith a 14 Amp\/Hour Battery Installed, the Unit Provides Approximately the Following Power:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e7 amps for 100 min.\u003c\/li\u003e\n\u003cli\u003e10 amps for 60 min.\u003c\/li\u003e\n\u003cli\u003e15 amps for 30 min.\u003c\/li\u003e\n\u003cli\u003e20 amps for 15 min\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Assuming battery at full charge when a.c. power failed.\u003c\/p\u003e\u003cp\u003eThe Power-Pac 7 A\/H (single battery model) can power a 25-watt transceiver for up to 3 hours, based on a 20% transmit\/receive duty cycle. Power-Pac 14 A\/H can provide the same service for up to 6 hours. Provision is made for expanding backup power up to twelve hours (in this example, longer under lesser loads) with the installation of additional externally wired batteries (total 28 amps\/hours max.). Batteries are automatically recharged when the AC is restored.\u003c\/p\u003e\u003cp\u003eThe operator is kept informed of all important functions, such as AC input, DC output, and battery status, with front panel indicator lights and a low battery warning buzzer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAC Input fuse\u003c\/li\u003e\n\u003cli\u003eInternal and external Battery fuses\u003c\/li\u003e\n\u003cli\u003eOver Voltage\u003c\/li\u003e\n\u003cli\u003eCurrent Limit\u003c\/li\u003e\n\u003cli\u003eAutomatic Thermal Shutdown\u003c\/li\u003e\n\u003cli\u003eLow Battery Disconnect\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Details:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVinyl Laminated aluminum case\u003c\/li\u003e\n\u003cli\u003e6’ standard AC power cord\u003c\/li\u003e\n\u003cli\u003eAc input selector switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBattery Details:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSealed Lead Acid, Deep-cycle.\u003c\/li\u003e\n\u003cli\u003eCertified by DOT and IATA for shipment by Air\u003c\/li\u003e\n\u003cli\u003eWeight per 7 AH Battery: 6 lbs.\u003c\/li\u003e\n\u003cli\u003eSize (inch): 6” x 3.75” x 2.5”\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForm C AC Failure Contacts (Contact factory for details)\u003c\/li\u003e\n\u003cli\u003eExtra batteries, sold separately 7 A\/H increments; each Power Pac will accommodate 28 A\/H max. (14 internal, 14 external)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/102324QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/102324OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571989041382,"sku":"ANX-102324","price":1283.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102324XL.jpg?v=1756899519"},{"product_id":"newmar-power-pac-7ah-power-supply-power-pac7ah","title":"Newmar Power-Pac 7AH Power Supply [POWER-PAC7AH]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower-Pac 7AH Power Supply\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 12V DC power supply features built-in backup batteries, which are charged during normal operation and then continue to power radios and critical navigation equipment when AC power is lost. The Power-Pac is ideal for commercial vessels, work boats, and yachts.\u003c\/p\u003e\u003cp\u003eThe Power-Pac’s highly regulated, low-rising 10-amp output powers radios and other sensitive communications equipment without causing RF or audio interference. At the same time, it floats and charges one or two (depending on the model) built-in 7-amp\/hour backup batteries. These are kept at peak charge during the normal functioning of the unit when AC is being supplied. In the event of a loss of AC power, the internal batteries automatically take over to power communication equipment, providing a true uninterruptible DC source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHighly regulated, low ripple, noise-free 12-volt output\u003c\/li\u003e\n\u003cli\u003eBuilt-in, “on-line” stand-by battery provides immediate backup power in case of AC power loss\u003c\/li\u003e\n\u003cli\u003eInternal mounting space and terminals for conversion of the 7 A\/H model into the 14 A\/H model\u003c\/li\u003e\n\u003cli\u003eOutput “Normal” indicator L.E.D.\u003c\/li\u003e\n\u003cli\u003e“Back-up power only” warning light\u003c\/li\u003e\n\u003cli\u003eAudible and visual low battery (10.7 VDC) voltage indicators\u003c\/li\u003e\n\u003cli\u003eLow battery warning buzzer mute switch\u003c\/li\u003e\n\u003cli\u003eAutomatic low battery (10.3 VDC) voltage disconnect\u003c\/li\u003e\n\u003cli\u003eLow voltage disconnect override button\u003c\/li\u003e\n\u003cli\u003eOver-voltage protection\u003c\/li\u003e\n\u003cli\u003eCurrent limit protection\u003c\/li\u003e\n\u003cli\u003eInput\/output fused\u003c\/li\u003e\n\u003cli\u003eSeparate output terminals are provided for charging external batteries\u003c\/li\u003e\n\u003cli\u003e115\/230 50-60 Hz input, selected by a slide switch on the rear panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery Capacity: 7 amp\/hour  \u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 5.3 x 9.0 x 10.5 inches (13.3 x 22.9 x 26.7 centimeters)  \u003c\/li\u003e\n\u003cli\u003eWeight: 18 lbs. (8.2 kg)\u003c\/li\u003e\n\u003cli\u003eInput: 115\/230 VAC, 50-60 Hz.\u003c\/li\u003e\n\u003cli\u003eOutput: 13.6 VDC @ 5A cont., 10A Int.\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% line and load\u003c\/li\u003e\n\u003cli\u003eRipple: 1% P-P\u003c\/li\u003e\n\u003cli\u003eOperating Temp: 0-40 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWith a 7 Amp\/Hour Battery Installed, the Unit Provides Approximately the Following Power. *7 Amps for 40 Min.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e10 amps for 20 min.\u003c\/li\u003e\n\u003cli\u003e15 amps for 10 min.\u003c\/li\u003e\n\u003cli\u003e20 amps for 4 min.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Assuming battery at full charge when a.c. power failed.\u003c\/p\u003e\u003cp\u003eThe Power-Pac 7 A\/H (single battery model) can power a 25-watt transceiver for up to 3 hours, based on a 20% transmit\/receive duty cycle. Power-Pac 14 A\/H can provide the same service for up to 6 hours. Provision is made for expanding backup power up to twelve hours (in this example, longer under lesser loads) with the installation of additional externally wired batteries (total 28 amps\/hours max.). Batteries are automatically recharged when the AC is restored.\u003c\/p\u003e\u003cp\u003eThe operator is kept informed of all important functions, such as AC input, DC output, and battery status, with front panel indicator lights and a low battery warning buzzer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAC Input fuse\u003c\/li\u003e\n\u003cli\u003eInternal and external Battery fuses\u003c\/li\u003e\n\u003cli\u003eOver Voltage\u003c\/li\u003e\n\u003cli\u003eCurrent Limit\u003c\/li\u003e\n\u003cli\u003eAutomatic Thermal Shutdown\u003c\/li\u003e\n\u003cli\u003eLow Battery Disconnect\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Details:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVinyl Laminated aluminum case\u003c\/li\u003e\n\u003cli\u003e6’ standard AC power cord\u003c\/li\u003e\n\u003cli\u003eAc input selector switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBattery Details:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSealed Lead Acid, Deep-cycle.\u003c\/li\u003e\n\u003cli\u003eCertified by DOT and IATA for shipment by Air\u003c\/li\u003e\n\u003cli\u003eWeight per 7 AH Battery; 6 lbs.\u003c\/li\u003e\n\u003cli\u003eSize (inch): 6” x 3.75” x 2.5”\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForm C AC Failure Contacts (Contact factory for details)\u003c\/li\u003e\n\u003cli\u003eExtra batteries, sold separately 7 A\/H increments; each Power Pac will accommodate 28 A\/H max. (14 internal, 14 external)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/102325QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/102325OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571989074150,"sku":"ANX-102325","price":1077.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102325XL.jpg?v=1756899518"},{"product_id":"newmar-pt-14w-battery-charger-pt-14w","title":"Newmar PT-14W Battery Charger [PT-14W]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePT-14W Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNewmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless-steel case with a durable white powder coat finish, and the internal circuitry is polyurethane-coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eClean well-regulated output can be used as a power supply; can power loads directly without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless-steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 85-264    \u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 2.8, @ 230 VAC: 1.4 \u003c\/li\u003e\n\u003cli\u003eP.F. Rating: .93@230V and .98@115V\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 14\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 28-140    \u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-2\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-2\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 11.2A x 7.7 x 4.75A inches (31.8A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 8\/4\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24    \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: RP\u003c\/li\u003e\n\u003cli\u003eEqualize Option: Yes\u003c\/li\u003e\n\u003cli\u003eOutput Indicator Reference: M-3\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CG, CE    \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -10 degrees C to +60 degrees C    \u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 40 degrees C to 60% @ 60 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRemote Panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate the charger output stage. Manual re-initialization of a three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCharger Input - Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eCharger Output - Amps: 14a\u003c\/li\u003e\n\u003cli\u003eCharger Output Voltage: 12v\u003c\/li\u003e\n\u003cli\u003eCharging Banks: 3\u003c\/li\u003e\n\u003cli\u003ePortable: No\u003c\/li\u003e\n\u003cli\u003eInverter Input Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eInverter Output Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eOutlet Qty: Hardwire\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 10\"H x 11\"W x 16\"L WT: 9.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/102327QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/102327OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571989139686,"sku":"ANX-102327","price":943.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102327XL.jpg?v=1756899517"},{"product_id":"newmar-pt-24-13w-battery-charger-pt-24-13w","title":"Newmar PT-24-13W Battery Charger [PT-24-13W]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePT-24-13W Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eUse as a power supply; can power loads without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eInstall in conjunction with PT-MCU for additional control and monitoring\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 90 – 132, 180 – 264\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 6.5, @ 230 VAC: 4 \u003c\/li\u003e\n\u003cli\u003ePower Factor: .7\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 13\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 26 – 130\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-2\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-1\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 11.2A x 7.7 x 4.75A inches (28.4A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 8\/4\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24    \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: RP\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CG, ABS \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -10 degrees C to +60 degrees C    \u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 50 degrees C to 60% @ 60 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUL: UL 1950 (per DNB report)\u003c\/li\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eEN: EN 60335-1\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRemote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCharger Input - Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eCharger Output - Amps: 13a\u003c\/li\u003e\n\u003cli\u003eCharger Output Voltage: 24v\u003c\/li\u003e\n\u003cli\u003eCharging Banks: 3\u003c\/li\u003e\n\u003cli\u003ePortable: No\u003c\/li\u003e\n\u003cli\u003eInverter Input Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eInverter Output Voltage: 24v\u003c\/li\u003e\n\u003cli\u003eOutlet Qty: Hardwire\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 10\"H x 10\"W x 16\"L WT: 9 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/102328OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571989172454,"sku":"ANX-102328","price":1073.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102328XL.jpg?v=1756899517"},{"product_id":"newmar-pt-24-20u-battery-charger-pt-24-20u","title":"Newmar PT-24-20U Battery Charger [PT-24-20U]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePT-24-20U Battery Charge\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eUse as a power supply; can power loads without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eInstall in conjunction with PT-MCU for additional control and monitoring\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 85 – 135, 170 – 270\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 6.8, @ 230 VAC: 4.3 \u003c\/li\u003e\n\u003cli\u003ePower Factor: .7\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 20\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 40– 200\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-3\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-2\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 13.85B x 9.5 x 4.8B inches (35.2B x 24.1 x 12.2B centimeters) *Note with Dripshield installed B add .75” (1.9 cm) to height and 1.35” (3.4 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 12\/6\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24    \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: NA\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CG, ABS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -20 degrees C to +60 degrees C    \u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 50 degrees C to 60% @ 60 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUL: UL 1950 (per DNB report)\u003c\/li\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eEN: EN 60335-1\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCharger Input - Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eCharger Output - Amps: 20a\u003c\/li\u003e\n\u003cli\u003eCharger Output Voltage: 24v\u003c\/li\u003e\n\u003cli\u003eCharging Banks: 3\u003c\/li\u003e\n\u003cli\u003ePortable: No\u003c\/li\u003e\n\u003cli\u003eInverter Input Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eInverter Output Voltage: 24v\u003c\/li\u003e\n\u003cli\u003eOutlet Qty: Hardwire\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 11\"H x 15\"W x 20\"L WT: 14.3 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/102329QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/102329OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571989205222,"sku":"ANX-102329","price":1657.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102329XL.jpg?v=1756899516"},{"product_id":"newmar-pt-24-45u-battery-charger-pt-24-45u","title":"Newmar PT-24-45U Battery Charger [PT-24-45U]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePT-24-45U Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eUse as a power supply; can power loads without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eInstall in conjunction with PT-MCU for additional control and monitoring\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 90 – 264\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 12, @ 230 VAC: 7 \u003c\/li\u003e\n\u003cli\u003ePower Factor: .98@115V and .95@230V\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 45\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 90 – 450\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-5\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-4\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 14.8B x 9.6 x 5.6D inches (37.6D x 24.4 x 14.2D centimeters) *Note with Dripshield installed D add 1” (2.54 cm) to height and .5” (1.2 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 12\/6\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24    \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: RP\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: EN, CE, ABS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -20 degrees C to +70 degrees C    \u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 50 degrees C to 50% @ 70 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUL: UL 1950 (per DNB report)\u003c\/li\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eEN: EN 60335-1\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRemote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCharger Input - Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eCharger Output - Amps: 45a\u003c\/li\u003e\n\u003cli\u003eCharger Output Voltage: 24v\u003c\/li\u003e\n\u003cli\u003eCharging Banks: 3\u003c\/li\u003e\n\u003cli\u003ePortable: No\u003c\/li\u003e\n\u003cli\u003eInverter Input Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eInverter Output Voltage: 24v\u003c\/li\u003e\n\u003cli\u003eOutlet Qty: Hardwire\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 10\"H x 14\"W x 20\"L WT: 18 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/102330QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/102330OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571989237990,"sku":"ANX-102330","price":2712.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102330XL.jpg?v=1756899516"},{"product_id":"newmar-pt-24-60w-battery-charger-pt-24-60w","title":"Newmar PT-24-60W Battery Charger [PT-24-60W]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePT-24-60W Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“Smart” marine battery charging technology for 24V systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24V model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eUse as a power supply; can power loads without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eInstall in conjunction with PT-MCU for additional control and monitoring\u003c\/li\u003e\n\u003cli\u003eABS type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 207-253\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: NA, @ 230 VAC: 13\u003c\/li\u003e\n\u003cli\u003ePower Factor: .7\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 60\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 120-600    \u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-4\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-5\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 17.5E x 12 x 7.2E inches (44.5E x 30.5 x 18.3E centimeters) *Note with Dripshield installed E add 2” (5.08 cm) to height and 1” (2.54 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 24.1\/11\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TP    \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: N\/A\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: EN, CE, ABS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -20 degrees C to +50 degrees C    \u003c\/li\u003e\n\u003cli\u003eDerate Linearly From Full output\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUL: UL 1950 (per DNB report)\u003c\/li\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eEN: EN 60335-1\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/102331QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/102331OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571989270758,"sku":"ANX-102331","price":3772.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102331XL.jpg?v=1756899516"},{"product_id":"newmar-pt-24-8w-battery-charger-pt-24-8w","title":"Newmar PT-24-8W Battery Charger [PT-24-8W]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePT-24-8W Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eUse as a power supply; can power loads without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eInstall in conjunction with PT-MCU for additional control and monitoring\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 85 – 264\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 2.8, @ 230 VAC: 1.4\u003c\/li\u003e\n\u003cli\u003ePower Factor: .98@115V and .93@230V\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 8\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 16 – 80\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-1\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-1\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 11.2A x 7.7 x 4.75A inches (28.4A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 8\/4\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24        \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: RP\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CG, CE, ABS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -10 degrees C to +60 degrees C\u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 40 degrees C to 60% @ 60 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUL: UL 1950 (per DNB report)\u003c\/li\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eEN: EN 60335-1\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRemote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCharger Input - Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eCharger Output - Amps: 8a\u003c\/li\u003e\n\u003cli\u003eCharger Output Voltage: 24v\u003c\/li\u003e\n\u003cli\u003eCharging Banks: 3\u003c\/li\u003e\n\u003cli\u003ePortable: No\u003c\/li\u003e\n\u003cli\u003eInverter Input Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eInverter Output Voltage: 24v\u003c\/li\u003e\n\u003cli\u003eOutlet Qty: Hardwire\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 10\"H x 10\"W x 16\"L WT: 8.3 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/102332QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/102332OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571989303526,"sku":"ANX-102332","price":1135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102332XL.jpg?v=1756899515"},{"product_id":"newmar-pt-24-95u-battery-charger-pt-24-95u","title":"Newmar PT-24-95U Battery Charger [PT-24-95U]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePT-24-95U Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eUse as a power supply; can power loads without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eInstall in conjunction with PT-MCU for additional control and monitoring\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 90-264\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 26, @ 230 VAC: 14\u003c\/li\u003e\n\u003cli\u003ePower Factor: .98@115V and .95@230V\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 95\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 180 – 950\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-5\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-5\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 17.5E x 12 x 7.2E inches (44.5E x 30.5 x 18.3E centimeters) *Note with Dripshield installed E add 2” (5.08 cm) to height and 1” (2.54 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 24.5\/11\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24            \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: RP\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: EN, CE, ABS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -20 degrees C to +70 degrees C\u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 50 degrees C to 50% @ 70 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUL: UL 1950 (per DNB report)\u003c\/li\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eEN: EN 60335-1\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRemote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCharger Input - Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eCharger Output - Amps: 95a\u003c\/li\u003e\n\u003cli\u003eCharger Output Voltage: 24v\u003c\/li\u003e\n\u003cli\u003eCharging Banks: 3\u003c\/li\u003e\n\u003cli\u003ePortable: No\u003c\/li\u003e\n\u003cli\u003eInverter Input Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eInverter Output Voltage: 24v\u003c\/li\u003e\n\u003cli\u003eOutlet Qty: Hardwire\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 12\"H x 17\"W x 25\"L WT: 31.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/102333QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/102333OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571989336294,"sku":"ANX-102333","price":4243.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102333XL.jpg?v=1756899515"},{"product_id":"newmar-pt-25w-battery-charger-pt-25w","title":"Newmar PT-25W Battery Charger [PT-25W]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePT-25W Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNewmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, and float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts the output voltage based on battery temperature. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eCurrent limitations prevent damage from overloading\u003c\/li\u003e\n\u003cli\u003eClean well-regulated output can be used as a power supply; can power loads directly without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish, an optional drip shield, and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 90-132 or 180-264\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 6.5, @ 230 VAC: 4\u003c\/li\u003e\n\u003cli\u003ePower Factor: .7\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 25\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 50-250\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-4\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-2\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 11.2A x 7.7 x 4.75A inches (31.8A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 8.2\/4\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24                \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: RP\u003c\/li\u003e\n\u003cli\u003eEqualize Option: Yes\u003c\/li\u003e\n\u003cli\u003eOutput Indicator Reference: M-3\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -20 degrees C to +60 degrees C\u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 50 degrees C to 60% @ 60 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote Panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)\u003c\/li\u003e\n\u003cli\u003eTemperature Compensation Sensor, Model TCS 12\/24, for use with all models except PT 7 (-5 mV per cell degrees C, 25′ cable (40’cable optional)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCharger Input - Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eCharger Output - Amps: 25a\u003c\/li\u003e\n\u003cli\u003eCharger Output Voltage: 12v\u003c\/li\u003e\n\u003cli\u003eCharging Banks: 3\u003c\/li\u003e\n\u003cli\u003ePortable: No\u003c\/li\u003e\n\u003cli\u003eInverter Input Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eInverter Output Voltage: 12v\u003c\/li\u003e\n\u003cli\u003eOutlet Qty: Hardwire\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 10\"H x 10\"W x 16\"L WT: 9.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/102334OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571989369062,"sku":"ANX-102334","price":1062.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102334XL.jpg?v=1756899515"},{"product_id":"newmar-pt-40u-battery-charger-pt-40u","title":"Newmar PT-40U Battery Charger [PT-40U]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePT-40U Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNewmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, and float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts the output voltage based on battery temperature. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eCurrent limitations prevent damage from overloading\u003c\/li\u003e\n\u003cli\u003eClean well-regulated output can be used as a power supply; can power loads directly without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish, an optional drip shield, and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 90-264\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 6.8, @ 230 VAC: 3.4\u003c\/li\u003e\n\u003cli\u003ePower Factor: .98 @ 115V and .95 @ 230V\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 40\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 80-400    \u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-5\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-3\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 13.85B x 9.5 x 4.8B inches (35.2B x 24.1 x 12.2B centimeters) *Note with Dripshield installed B add .75” (1.9 cm) to height and 1.35” (3.4 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 11\/6\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24                \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: EVM-12-2    \u003c\/li\u003e\n\u003cli\u003eEqualize Option: No\u003c\/li\u003e\n\u003cli\u003eOutput Indicator Reference: M-3\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -20 degrees C to +70 degrees C\u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 50 degrees C to 50% @ 70 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote Panel, model EVM-12-2, for us with model PT-40 only (Enables monitoring of when the battery charger is “on” and the batteries’ state of readiness, at a glance of two (2) battery banks only)\u003c\/li\u003e\n\u003cli\u003eTemperature Compensation Sensor, Model TCS 12\/24, for use with all models except PT 7 (-5 mV per cell degrees C, 25′ cable (40’cable optional)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCharger Input - Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eCharger Output - Amps: 40a\u003c\/li\u003e\n\u003cli\u003eCharger Output Voltage: 12v\u003c\/li\u003e\n\u003cli\u003eCharging Banks: 3\u003c\/li\u003e\n\u003cli\u003ePortable: No\u003c\/li\u003e\n\u003cli\u003eInverter Input Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eInverter Output Voltage: 12v\u003c\/li\u003e\n\u003cli\u003eOutlet Qty: Hardwire\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 11\"H x 15\"W x 20\"L WT: 14.7 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/102335QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/102335OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571989401830,"sku":"ANX-102335","price":1727.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102335XL.jpg?v=1756899514"},{"product_id":"newmar-pt-80-battery-charger-pt-80","title":"Newmar PT-80 Battery Charger [PT-80]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePT-80 Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNewmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, and float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts the output voltage based on battery temperature. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eCurrent limitations prevent damage from overloading\u003c\/li\u003e\n\u003cli\u003eClean well-regulated output can be used as a power supply; can power loads directly without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish, an optional drip shield, and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 90-264\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 12, @ 230 VAC: 7\u003c\/li\u003e\n\u003cli\u003ePower Factor: .95@230V or .98@115V\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 80\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 160-800\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-7\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-5\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 16.8C x 9.6 x 6.1C inches (42.7C x 24.4 x 15.5C centimeters) *Note with Dripshield installed C add 1” (2.54 cm) to height and .5” (1.27 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 15.2\/7\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24                \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: RP\u003c\/li\u003e\n\u003cli\u003eEqualize Option: Yes\u003c\/li\u003e\n\u003cli\u003eOutput Indicator Reference: M-3\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -10 degrees C to +60 degrees C\u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 50 degrees C to 80% @ 60 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meet SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote Panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)\u003c\/li\u003e\n\u003cli\u003eTemperature Compensation Sensor, Model TCS 12\/24, for use with all models except PT 7 (-5 mV per cell degrees C, 25′ cable (40’cable optional)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsnZpn ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCharger Input - Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eCharger Output - Amps: 80a\u003c\/li\u003e\n\u003cli\u003eCharger Output Voltage: 12v\u003c\/li\u003e\n\u003cli\u003eCharging Banks: 3\u003c\/li\u003e\n\u003cli\u003ePortable: No\u003c\/li\u003e\n\u003cli\u003eInverter Input Voltage: 115\/230v\u003c\/li\u003e\n\u003cli\u003eInverter Output Voltage: 12v\u003c\/li\u003e\n\u003cli\u003eOutlet Qty: Hardwire\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 11\"H x 15\"W x 20\"L WT: 18 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/102336QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/102336OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571989434598,"sku":"ANX-102336","price":2865.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102336XL.jpg?v=1756899514"},{"product_id":"newmar-gs-2-100-grounding-strap-2-x-100-gs-2-100","title":"Newmar GS-2-100 Grounding Strap - 2\" x 100' [GS-2-100]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGS-2-100 Grounding Strap - 2\" x 100'\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis grounding strap is an ideal conductor for RF grounding of SSB radios and other noise-sensitive transceivers, for bonding thru-hulls, etc.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlexible (easily conforms to vessel contours)\u003c\/li\u003e\n\u003cli\u003e.01 in. (25mm) thick\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWidth (in.\/cm): 2\/5.1\u003c\/li\u003e\n\u003cli\u003eLength (ft.\/m): 100\/33\u003c\/li\u003e\n\u003cli\u003eWeight (lbs\/kg): 8\/3.6\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571989565670,"sku":"ANX-102344","price":1441.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102344XL.jpg?v=1756899512"},{"product_id":"newmar-copper-mesh-screen-25-screen-25","title":"Newmar Copper Mesh Screen - 25' [SCREEN-25]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCopper Mesh Screen - 25'\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tight copper mesh (.05″ x.01″ wire spacing) is ideal for creating a ground plane in the hull. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMay be placed into electronic enclosures to provide an RF barrier\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLength (feet): 25\u003c\/p\u003e\u003cp\u003eWidth (inches): 4 \u003c\/p\u003e\u003cp\u003eWeight (lbs\/kg): 16\/7.3\u003c\/p\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571991793894,"sku":"ANX-102429","price":1093.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102429XL.jpg?v=1756899487"},{"product_id":"newmar-es-1-elite-dc-panel-es-1","title":"Newmar ES-1 Elite DC Panel [ES-1]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eES-1 Elite DC Panel \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis DC master control panel offers a large DC circuit capacity and can be installed by itself or in conjunction with the ES-2 panel to make a complete AC-DC control and monitoring system. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAnalog DC volt and ammeter, back-illuminated with dimmer\u003c\/li\u003e\n\u003cli\u003e12-volt standard, 24-volt optional\u003c\/li\u003e\n\u003cli\u003e4 battery bank test switch\u003c\/li\u003e\n\u003cli\u003eDC master breaker (100 Amp standard; 50 or 75 amp optional)\u003c\/li\u003e\n\u003cli\u003e22 branch circuit capacity, 20 installed standard; 3-5A, 5-10A, 6-15A,\u003c\/li\u003e\n\u003cli\u003e6-20A or specify\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize (W x H x D): 10 x 15 x 4 inches\u003c\/li\u003e\n\u003cli\u003eWeight: 8 lbs. (3.6 kg)\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571992219878,"sku":"ANX-102463","price":2062.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102463XL.jpg?v=1756899481"},{"product_id":"newmar-es-7d-elite-dc-panel-es-7d","title":"Newmar ES-7D Elite DC Panel [ES-7D]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eES-7D Elite DC Panel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis panel is designed for expanding AC or DC circuit capacity on any Elite Series panel, or it may be used as a stand-alone load center.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAC (120\/240V) or DC (12\/24V) master breaker (double pole AC 50 amp* standard, 30 amp optional, or DC 100 single pole amp standard; 50 or 75 amp optional\u003c\/li\u003e\n\u003cli\u003e16 branch circuit capacity, 12 installed standards: ES-7A: 2-10A, 5-15A, 5-20A ES-7D: 2-5A, 3-10A, 5-15A, 2-20A\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize (W x H x D): 5.25 x 15 x 4 inches\u003c\/li\u003e\n\u003cli\u003eWeight: 7 lbs. (3.2 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: 50-amp master is OK for use on 230 VAC line-to-line systems. For 230 VAC line-to-neutral systems, 30 amp is the maximum master breaker value.\u003c\/p\u003e \u003c!--- cis2:m2lsnZpn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46571992252646,"sku":"ANX-102464","price":1087.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/2212\/7846\/files\/102464XL.jpg?v=1756899481"}],"url":"https:\/\/www.adrenaluxe.co\/collections\/newmar-power.oembed","provider":"Adrenalux","version":"1.0","type":"link"}